Our Process

Parts must be clean, free of oil or grease and disassembled. Any items requiring disassembly or assembly will have an additional charge. All bearings, seals, gaskets, bushings, etc. must be removed. If we receive any items that require removal of such parts, there will be an up charge. Items cannot contain any bondo or filler.

Powder Coated Warranty

New Item: 12 Months

Used Item: 6 Months

BPC is not responsible for poorly cast parts which may have surface imperfections.

	Chemical pre-treatment and an abrasive media will be used on your parts. It is the responsibility of the customer to thoroughly clean all parts before assembly. Although all threaded holes are plugged,we recommend that they be tapped. BPC is not responsible for the failure of any part due to improper cleaning.



	The most common way of applying the powder coating to metal objects is to spray the powder using an electrostatic gun, or corona gun. The gun imparts a negative electric charge to the powder, which is then sprayed towards the grounded object by mechanical or compressed air spraying and then accelerated toward the workpiece by the powerful electrostatic charge.

The object is then heated, in our 20ft long oven, the powder melts into a uniform film, and is then cooled to form a hard coating. Our new oven can accommodate a whole car frame. Large objects are not a problem, give us a call!